Hose clamp for Swing pool

€4.50 incl. VAT

Original hose clamp for the Swing pool and Clear filtration from Mountfield. It is tightened by hand with a wing nut and holds the hose firmly. Suitable for Swing BW cartridge and Clear sand filtration. Replace a broken clamp quickly and without tools.

  • For Swing BW and Clear filtration
  • Hand tightening
  • Original Mountfield part

4,8 from 450 reviews of the store on Google
+45 points in “Endless Summer”
+1 000 bonus points on your second purchase · terms
Description
Spare part for a prefabricated pool

Hose clamp for Swing pool

A hose clamp holds the hose firmly on the filtration fitting. This way the connection does not slip off under pressure and does not leak water.

The original Mountfield clamp fits the hoses of the Swing series. It is tightened by hand, without tools.

Code BWP6124Type: hose clampTightening: with a wing nutColour: grey
Скоба за маркуч за басейн Swing
Clamp with wing nut
Technical data
Manufacturer codeBWP6124
ManufacturerMountfield
Typehose clamp
Tighteningwith a wing nut
Colourgrey
Suitable forSwing BW and Clear filtration
Compatibility

Suitable for

  • Swing BW cartridge filtration 3 m³/h3BTE0397
  • Clear sand filtration 2 m³/h3BTE0398
  • Swing pool with cartridge filtration 3.66×0.92 m3BNA1136
  • Swing4Kids pool with cartridge filtration 3.05×0.76 m3BNA1138

The Swing filter O-ring and the Swing hose O-ring go with the same filtration unit. See also the spare parts for prefabricated pools, the cartridge filtration and the Swing 1.33 m³/h filter pump.

Compare the code of your filtration with the list. If you hesitate, write to us. Both hose clamps are often replaced at the same time.

What a hose clamp is for

The picture shows a grey plastic clamp with a screw and a wing nut. The clamp wraps around the hose at the fitting. When you tighten the nut, it clamps the hose evenly. The wing nut turns with your fingers. That is why no tools are needed. When taking the pool apart and putting it away for winter, such parts are easily lost or broken.

When to replace the clamp

  • when the clamp or its screw is broken;
  • when the nut spins freely;
  • when the hose slips off the fitting;
  • when the clamp was lost while putting the pool away.

How it is installed

First switch off the filtration. Then unscrew the nut and open the clamp. Slide it over the hose. Place the hose on the fitting and slide the clamp over the connection point. Finally, screw on the wing nut by hand until the hose is tight. Do not overtighten, so that the plastic does not crack.

Advantages of the original clamp

Universal hose clamps often cut into the hose or do not tighten it evenly. The original Mountfield clamp has a suitable diameter and a wide band. This is why it spreads the pressure over the hose and does not damage it. Its plastic construction does not rust in water. It is also fitted in seconds and without tools. Keep a spare clamp when you put the pool away.

Not sure this is your part?

Send us the model of the unit and a photo of the old part. We will check compatibility before you order.

Technical data
ManufacturerMountfield
Manufacturer codeBWP6124
Typehose clamp
Tighteningwith a wing nut
Colourgrey
Suitable forSwing BW and Clear filtration
About Mountfield
Czech Republic · Exclusive representative

Mountfield – family pools from the Czech Republic.

Exclusive representative of the largest European manufacturer — Baseini.NET, for Bulgaria.

The Mountfield factory in the Czech Republic – aerial view of the production site
120 000pools
per year
20+years of experience
1500+employees
71own garden hypermarkets in the Czech Republic and Slovakia
120 000pools annually
Country: Czech RepublicRepresentative: Exclusive for Bulgaria — Baseini.NET

The largest European manufacturer

Baseini.NET is the official representative for Bulgaria, Romania and Turkey of the Czech manufacturer Mountfield, the largest producer of family pools in Europe. Twenty years of experience, over 1500 employees, a sales network of 71 company-owned garden hypermarkets in the Czech Republic and Slovakia and a production of 120,000 pools per year are just some of the prerequisites that guarantee the European quality of the products offered.

Because European quality is #1

Two production buildings for the production of swimming pools, water treatment products, solar panels, solar showers, counter-current swim systems. High-quality materials, unique technology and precise workmanship are a guarantee of European quality of the products produced.

Mountfield display area with pools and a telescopic cover
Exhibition area with swimming pools
Production line for steel walls of Mountfield pools
Production
Mountfield showroom with an in-ground pool and a cover reel
Showroom
Steel coils for the production of Mountfield pools
Steel coils
Exhibition of hot tubs and pools in a Mountfield hypermarket
Mountfield Hypermarket
In the range

Mountfield products in our shop

Family pools
Water treatment products
Solar panels and solar showers
Counter-current swim systems
MTF hoses
Saunas and accessories
DELIVERY AND WARRANTY

Delivery time

  • The maximum delivery time for all products is up to 10 working days.
  • Most products are in stock and can be received in a matter of days.

Price and free shipping

  • The online store automatically calculates the price with the selected courier.
  • Free delivery on orders over €150 to a Speedy office, for Bulgaria only.
  • Below this threshold, delivery is at the customer’s expense according to the courier’s tariff.
  • You can pick up the product in person from the warehouse or office store after prior arrangement.

Full terms and conditions: Delivery terms →