Filter pumps
Pool pump – filter pumps and accessories
A pool filter pump moves water through the filter and back into the pool – without it the water cannot stay clean. At Baseini.NET you will find self-priming filter pumps SPECK BADU, Glong, Aqua Plus and Atlas Pool for prefabricated pools, in-ground pools and large public pools, as well as pre-filters, stands, filter rooms and a frequency converter.
Prices start from 96 € for a filter pump with a skimmer for tubular-frame pools and go up to about 1,400 € for the industrial Super Storm pumps.
Pool filter pumps by power
- SPECK BADU Picco 5, Magic 6, Magic 8 and Magic 11 – German self-priming pumps with a flow rate of 4–5 to 11 m³/h for private pools.
- Glong FCP-250S and FCP-370S2 – 5 and 7 m³/h, a cost-effective replacement for prefabricated pools.
- Aqua Plus 8 – 8 m³/h, quiet pump for pools up to 40 m³.
- Atlas Pool Florida and Best – single-phase or three-phase pumps from 0.5 to 3 HP; Best also comes in a version without a pre-filter.
- Atlas Pool Storm and Super Storm – three-phase pumps from 3.5 to 15 HP for large and public pools.
- SkimmerPlus SFX1000 – filter pump with skimmer for tubular frame pools.
How to choose a pool pump
The pump flow rate must match the filter and the pool volume – the water is fully filtered in about 4–6 hours. Do not install a pump more powerful than the filter’s permissible flow rate, because filtration quality drops. Self-priming pool pumps can also be installed above the water level. If the pump is above the water, a transparent check valve is installed in front of it. It keeps the water in the pump.
If you are replacing a pump, compare the connection dimensions and power supply – single-phase pumps operate on 230 V, and more powerful ones on three-phase current. The iSaver Rapid X20 frequency converter regulates the speed and reduces power consumption and noise.
Pump accessories
The pre-filter (PVC or stainless steel) protects the pump from leaves and hair. There are metal and fiberglass stands for installation, and the polyester filter room with a lid stores all the equipment next to the pool. Ready-made sets with a tank can be found in the section pool sand filter pump. You will find sand and cartridge pool filters in the “Filters and treatment” section.
Questions about pool pumps
What kind of pool pump do I need?
Divide the volume of the pool in cubic meters by 4–5 – this is the minimum flow rate in m³/h. For a pool with 30 m³ of water, choose a pump with about 6–8 m³/h, compatible with your filter.
How much do pool pumps cost?
Pool pump price: pumps for private pools cost from about 200 to 550 €, and the self-priming SPECK BADU from 306 €.
How much electricity does the pump consume?
It depends on the power and hours of operation. With a frequency converter or a pump with adjustable speed, the consumption can be significantly reduced.
What pump is used to drain a pool?
A submersible bibo pump is used to drain a pool. The MTF WPE020 and WPE055 are suitable for clean water. A submersible pump is the fastest way to drain a prefabricated pool before winterizing or changing the water.
- Self-priming pumps
- From 4 to 180 m³/h
- Prefilters and manholes
Showing all 28 results
Aqua Plus filter pump for Mountfield sand filter – 4, 6 and 11 m³/h
Aqua Plus self-priming filter pump with pre-filter – for sand filtration of pools up to 20, 30 or 50 m³.
- Flow rate 4, 6 or 11 m³/h
- Durable plastic casing and protection rating IP X5
- 50 mm connection for PVC pipe
- Power supply 220–240 V
Poolsana Pump 50, 75 and 100 Self-Priming Pool Pump with Pre-Filter
Self-priming pump for the sand filter of an above-ground pool – three power ratings: Pump 50, 75 and 100.
- From 4 to 8 m³/h, for pools up to 35 m³
- Pre-filter and cable with plug
- TÜV tested, with GS mark
- Hose adapters ∅ 32/38 mm
Speck SuperPro 8, 11, 14 and Eco Touch-Pro II Pool Pump – Self-Priming
Premium Speck SuperPro 8, 11, 14 and Eco Touch-Pro II self-priming pumps with variable speed – for pools up to 90 m³.
- From 10 to 23 m³/h at 6 m head
- Housing made of reinforced polypropylene
- TÜV tested, with GS mark
- ∅ 50 mm adapters included
Metal pre-filter Atlas
Metal pre-filter for circulation pumps, made of AISI 304 stainless steel and designed with flange connections.
- Six sizes – from 75-2 ½” to 225-8”.
- Installed before pumps that have no pre-filter of their own.
- Sturdy and durable material.
Frequency converter for pump iSaver Rapid X20
iSaver Rapid X20 is an intelligent inverter for controlling pool pumps that connects to the filtration system and optimizes its operation. By regulating the pump speed, it reduces electricity consumption, ensures quieter operation and extends the life of the equipment. It is suitable for private and public pools, ensuring efficient water circulation and lower maintenance costs.
- up to 80% – energy saving
- 220–240 V – power supply
- Wall – external / wall mounting
PVC pre-filter Atlas
Pre-filter for a circulation pump, made of U-PVC and designed with flange connections.
- Seven sizes – from 63-2" to 160-6”.
- Diameter 280 or 315 mm depending on the size.
- Installed before pumps without a pre-filter of their own.
Filter pump Best without pre-filter
The Best pump without pre-filter by Atlas Pool – a compact circulation pump, single-phase or three-phase, 0.75–3.00 HP, flow 14–32 m³/h at 9 m head, IP55.
- Arcelik (VEKO) motor, 2850 rpm and thermoplastic body
- Lighter construction than the model with pre-filter, drain plug included in the set
- Can also work with sea water
Filter pump Best with pre-filter
Best filter pump with pre-filter by Atlas Pool for family pools – single-phase or three-phase, 0.75–3.00 HP, flow 14–32 m³/h at 9 m head, IP55.
- Arcelik (VEKO) motor, 2850 rpm and thermoplastic body
- Pre-filter with transparent lid, union connections and drain plug
- Can also work with sea water
Filter pump Storm without pre-filter
Powerful three-phase Storm circulation pump without pre-filter by Atlas Pool, 3.50–5.50 HP, flow 66–87 m³/h at 9 m head, IP55.
- Powerful and economical Arcelik (VEKO) motor
- Thermoplastic body and drain plug included in the set
- Can also work with sea water
Filter pump Storm with pre-filter
Powerful three-phase Storm circulation pump with pre-filter by Atlas Pool, 3.50–5.50 HP, flow 64–85 m³/h at 9 m head, IP55.
- Arcelik (VEKO) motor and thermoplastic body
- Pre-filter with transparent lid, union connections and drain plug
- Can also work with sea water
Filter pump Super Storm without pre-filter
Powerful three-phase Super Storm circulation pump without pre-filter by Atlas Pool, 7.50–15.00 HP, flow 140–190 m³/h at 9 m head, IP55.
- Arcelik (VEKO) motor, bronze impeller and thermoplastic body
- Drain plug included in the set
- Can also work with sea water
Filter pump Super Storm with pre-filter
Powerful three-phase Super Storm circulation pump with pre-filter by Atlas Pool, 7.50–15.00 HP, flow 130–180 m³/h at 9 m head, IP55.
- Arcelik (VEKO) motor, bronze impeller and thermoplastic body
- Pre-filter, union connections and drain plug included in the set
- Can also work with sea water
Florida Filter Pump with Pre-Filter – Atlas Pool
The Florida filter pump with pre-filter by Atlas Pool – for small and medium pools. Single-phase or three-phase, from 0.50 to 1.50 HP, flow 12–21 m³/h at 9 m head, IP55 protection.
- IE2 motor with overheating protection and stainless steel shaft
- Pre-filter with transparent lid, union connections and drain plug
- Thermoplastic body; can also work with sea water
Filter room – polyester
A polyester (fibreglass) filter room with a lid included, in two sizes – 120 x 105 x 91 cm and 150 x 140 x 109 cm.
- In-ground or above-ground.
- Lid with easy half-lift.
- For filters with a diameter of up to 62 or up to 76 cm.
Transparent check valve with sight glass Ø50 and Ø63 mm – Atlas Pool
Transparent check valve for installation in front of the circulation pump. It keeps water in the suction line when the pump is above the water level, so it primes immediately. The sight glass shows the water and the flap. For PVC pipe Ø50 or Ø63 mm.
