Oasi Paving

Look and character of Oasi paving

The slab is flat and square. The surface is rough (Rough) or sandblasted; on request it can also be made with an Expo surface – with exposed grains. For the pool edge there is Oasi coping stone with the same 2.5 cm thickness.

Formats and prices

The price is per slab, including VAT. Choose the colour and format from the menus next to the price.

A 50 × 50 cm slab covers 0.25 m² – four slabs per square metre. The thickness – 2.5 or 3.5 cm – is stated in the order note; the price is the same.

Additional processing on request: Expo surface instead of rough – €0.86 per element. Request it in the order note.

Colours and surface

White, yellow, pink and brick are available with a rough or sandblasted surface, while grey is sandblasted only. The dark shade Active carries a surcharge. The Platinum and Crystal series are priced for the 50 × 50 cm format, and the small formats are on request. The colour on the screen depends on the monitor, so ask for a sample to see the exact shade.

Advantages of Carobbio paving

• Athermic – does not heat up in strong sun and can be walked on barefoot.
• Frost-resistant – withstands very low temperatures without a problem.
• Slip-resistant surface, tested to UNI EN 13451.
• Reconstituted stone made from natural aggregates, selected marbles and coloured pigments.
• Combines with Carobbio coping stones and overflow grilles in the same colour.
• Eco-friendly product made in Italy by a company with 50 years of experience.

How to lay the paving

1. Lay the slabs out dry and decide where cuts will be needed.
2. The base must be stable, dry and cured. Work at a temperature between 5 and 30–35 °C.
3. Glue with a professional stone adhesive.
4. For paving over 16 m², alternate slabs from all the pallets – this blends the shades evenly.
5. Grout with the manufacturer's grout mix and wipe off the excess immediately.
6. If the pool is still being built, cover the paving until the work is finished.

Materials for laying and cleaning

• Adhesive for coping and slabs, 25 kg bag – enough for about 20 slabs.
• Grout, 25 kg bag, in white, grey, pink, yellow and brick – for about 12 m² of slabs.
• Caroprotec impregnator against water and stains, 5 l container – for about 25 m² of slabs.
• Deter-AC for cleaning after installation and Cibermac for seasonal cleaning – 5 l containers, each for about 25 m² of slabs.

Maintenance

After laying, wash the paving with the post-installation cleaner. Then treat it with a water- and stain-repellent impregnator – stone that is not impregnated absorbs every kind of dirt. Do not wash smooth surfaces with a high-pressure washer or aggressive chemicals. Do not use de-icing salt on the paving. When the packaging is opened, there may be damp patches on the slabs. This is normal: the colour evens out completely in about six months.

Important before ordering

The products are a mix of natural aggregates and pigments, so the colour and sandblasting may differ between batches. For paving over 16 m², alternate elements from all the pallets. The tolerance for each size is ± 5 mm. Whitish patches (efflorescence) and, more rarely, brownish ones are possible – a natural phenomenon with cement-based materials that disappears over time. The manufacturer's warranty covers replacement of a defective element that has not yet been laid, so inspect the goods before installation.

About the manufacturer Carobbio

Carobbio S.r.l. is an Italian company from Sorisole near Bergamo. For fifty years it has been producing coping, paving and finishing elements for pools from reconstituted stone, and today it is run by the family's second generation. It also owns the patented RockPool system for prefabricated pools.