Joint Cap for Pool Profiles with LED Lighting

What a pool profile cap is for

The photo shows a white plastic clip with a slightly curved shape. It is placed over the joint of two profiles. This way it covers the seam between them. It also protects hands and body from sharp edges while swimming. The small part is easy to lose when dismantling the pool. That is why it is good to have a spare.

When to replace the cap

• when the cap is lost during dismantling;
• when the plastic is cracked or broken;
• when the cap no longer sits tightly on the profile;
• when you replace or repair the LED lighting.

How it is installed

First clean the profile around the joint. Then align the two profiles with each other. Place the cap over the seam and press it down. Finally, check that it is pressed along its whole length. Do not force it, so it does not crack. If it is cold, warm it in your hand first. This makes the plastic more flexible and easier to fit.

Advantages of the original cap

The original part is made exactly to the pool profiles. That is why it leaves no gap and does not slip. Universal substitutes are often wider or thinner. They therefore look untidy and fall off easily. The colour of the original also matches the profile, which matters for the appearance. Order a spare cap now and assemble the pool without worry every spring. Small details shape the overall impression of the pool. Keep it in order by replacing worn parts in time and using only suitable original components.