1 m Twist Lock hose for MX8, T3 and T5 pool vacuum

When to replace the pool vacuum hose

Replace the hose when it is cracked, stretched or its connection does not hold. The same applies to air leaks that reduce suction. You should also check it at the start of the season. A sound hose ensures an even flow and smooth operation of the unit.

Why an original part

The original part is made for the specific model. That is why it fits exactly and does not change the way the unit works. An unsuitable substitute may not fit well or may wear out faster.

How it is installed

Prepare a clean cloth and a table to work on. Work in a dry place and do not rush, so as not to bend or break other parts. First photograph the old part in place to remember how it is assembled. Then compare the new one with it before fitting. This way you can see at once whether the shape and size match.

1. Switch off the filtration.
2. Unscrew the old section by twisting.
3. Inspect the connections for cracks.
4. Connect the new hose and twist it until it locks.
5. Start the filtration and check for leaks.

Maintenance tips

Rinse the pool vacuum with clean water after every use. Also check its parts at the start of the season. This way small damage is spotted in time and does not stop the cleaning. Do not leave the unit in the sun for long outside the water. Store it in a dry, ventilated place outside the season. Also check the cable and its connections for visible damage.

What You Get

1. Original manufacturer's part
2. Exact match with the listed models
3. Easy to find by the manufacturer's code

Before ordering, compare the code of your unit with the list above. If you are unsure, write to us and we will help you choose the right part. This way you buy once and without extra costs.

See also the white hose for a pool cleaner, the track for the MX8 pool cleaner and the hose connector for a pool cleaner. You will find more original parts in the spare parts for pool cleaners.