Underwater lighting
Showing 37–67 of 67 results
LED lamp Par 56 – 30W – yellow
PAR56 30 W LED bulb – yellow, for replacement in a compatible underwater pool light. Together with water cooling, 84 LEDs give a warm yellowish light and a long life for the lamp.
- 30 W / 12 V, PAR56 format
- 84 LEDs, water cooling
- Atlas Pool
The set does not include the transformer. You therefore connect the light to 220 V only through a suitable 12 V transformer, and only a qualified electrician installs it.
LED lamp Par 56 – 30W – blue
PAR56 30 W LED bulb – blue, for replacement in a compatible underwater pool light. Together with water cooling, 270 LEDs give a rich blue light and a long life for the lamp.
- 30 W / 12 V, PAR56 format
- 270 LEDs, water cooling
- Atlas Pool
The set does not include the transformer. You therefore connect the light to 220 V only through a suitable 12 V transformer, and only a qualified electrician installs it.
RGB LED bulb PAR56 30 W – multicolour
RGB LED bulb PAR56 30W for multicolor underwater lighting on a compatible pool spotlight. Decorative colored scenes in the water.
The transformer is not included. It is connected to 220 V only through a suitable 12 V transformer and is installed only by a qualified electrician.
The transformer is not included. It is connected to 220 V only through a suitable 12 V transformer and is installed only by a qualified electrician.
Pool transformer 100 W / 12 V
The 100 W / 12 V pool transformer from Atlas Pool – a reliable power supply for the pool's underwater lighting. It converts 220 V to a low voltage of 12 V.
- input 220 V, output 12 V
- PVC housing with air cooling
- input protector 220 V
- ambient temperature from 0 °C to +45 °C
Installation and connection must be carried out only by a qualified electrician.
Pool transformer 300 W / 12 V
The 300 W / 12 V pool transformer from Atlas Pool – a reliable power supply for the pool's underwater lighting. It converts 220 V to a low voltage of 12 V.
- input 220 V, output 12 V
- PVC housing with air cooling
- input fuse 220 V
- ambient temperature from 0 °C to +45 °C
Only a qualified electrician carries out the installation and connection.
Pool transformer 400 W / 12 V
The 400 W / 12 V pool transformer from Atlas Pool is a reliable power supply for the pool's underwater lighting. It also converts 220 V to a low voltage of 12 V.
- input 220 V, output 12 V
- plastic housing
- input fuse 220 V
- ambient temperature from 0 °C to +45 °C
Also, only a qualified electrician carries out the installation and connection.
RGB control module with remote control for up to 8 lights
An RGB control module with remote control that puts your pool's colours in your hands. Change the light colour and brightness from up to 50 m away. It also connects up to 8 compatible LED RGB spotlights.
- 4 connection points
- On, off, colour and intensity
- Radio frequency (RF) remote control
- Versions for lights with 4 cables (HIA036) or 2 cables (HIA152)
Control panel for 1 pump and up to 5 lights
The single-phase control panel for pump and lighting controls one filter pump and up to 5 underwater lights. It has two separate timers, so you set the filtration and lighting hours independently. Moreover, the electrical components are Siemens, with a waterproof relay and leakage protection.
- Filter pump 0.75–3 HP
- Up to 5 underwater spotlights
- Box 22 × 30 × 12 cm, weight 1.4 kg
- Three-phase version made to special order
RGB modulator control box with remote control for up to 20 lights
This control box with an RGB modulator and a remote control suits larger pools. It controls the colour and brightness of up to 20 compatible LED RGB lights from up to 50 m. Moreover, the electrical components in the panel are Siemens.
- 4 connection points, for 2- and 4-core cables
- On, off, colour and intensity
- Option for 20 more lamps with the HIA037 add-on
- Radio frequency (RF) remote control
Control panel Profi for filter pumps and lighting
The Profi control panel controls from 1 to 5 filter pumps and up to 30 underwater lights. Additionally, the circuit breakers, contactors and relays are Siemens. Moreover, you control the groups with Pako switches. Finally, the WORK and FAULT indicators show operation and malfunction.
- 5 models depending on the number of pumps and lights
- Siemens components
- Terminal block outputs
Control panel with timer and remote control for lighting, 13 A / 50 W
The control panel with timer runs the pool circulation pump on a set schedule. It also controls the lighting separately with the included remote. The panel has 13 A protection and a built-in 50 W transformer for the underwater lighting.
- 1 timer for the pump
- Remote control for the lighting
- 13 A protection, 50 W transformer
- Manufacturer Atlas Pool
Cable protector – spiral tube by the linear metre – Atlas Pool
The Atlas Pool cable protector – a flexible spiral tube that provides additional mechanical protection for the cable when laid underground. It is sold by the linear metre, so you order exactly the length you need.
- flexible spiral plastic tube
- for underground laying and mechanical protection of cables
- sold by the linear meter
- catalogue no. HIA034
Junction box Hayward
The Hayward junction box – a practical connection point between the spotlight cable and the power supply installation. It keeps the connections tidy and accessible during installation and servicing.
- for underwater pool lighting
- manufacturer Hayward
- connecting and servicing the cable line
- weight 0.4 kg
Poolsana Profi spotlight cable box – 300 W junction box
The Poolsana Profi spotlight junction box – a reliable place to connect the underwater lighting to the transformer. You install it above the waterline in fully in-ground pools, so the connections stay dry, protected and easily accessible.
- You extend the spotlight cable with terminals
- Connects to the spotlight through a protective conduit (not included)
- Designated for underwater spotlights up to 300 W
- Installation above the waterline
AISI 304 stainless steel frame for underwater lights – Atlas Pool
Stainless steel light frame made of AISI 304 steel – a clean and durable finish for the pool's underwater lamp. Choose between two models according to the type of light.
- AISI 304 steel, moisture-resistant
- model for surface-mounted lamp
- standard model
- for Atlas Pool underwater lighting
- easy to clean
Poolsana 230/12 V safety transformer for pool – 50 VA or 100 VA for LED lighting
Short-circuit proof pool safety transformer that steps the voltage down from 230 V to 12 V. Also suitable for LED lights, made in Germany.
- 50 VA for LED lamps up to 50 W
- 100 VA for two LED lamps of up to 50 W each
- Mains cable 2 m with plug
Controller with Remote for Poolsana Compact RGB LED Pool Lights – Brio RC
The Brio RC controller lets you change the colours of Poolsana Compact RGB LED lights with a radio remote control. It also controls up to 3 lights of 40 W each or up to 4 lights of 30 W each.
- Total switching power 120 W
- Supply 12 V, protection rating IP 55
- Connected in series with the power supply of the lights
PAR56 LED Pool Light Poolsana Profi – White 20 W or RGB 30 W, Standalone or Kit
PAR56 Profi underwater light for installation in straight pool walls. It also comes with a 20 W white LED lamp or a 30 W RGB lamp, standalone or in a kit.
- ABS housing, lamp with 316L/V4A stainless steel back
- Protection rating IP68, 12 V supply
- The kits also include a transformer and junction box
White LED Pool Light Poolsana Compact Power 40 W – Lamp, Niche or Kit
Flat white LED pool light 12 V / 40 W for evening pool lighting. It gives a cool white light of 4,400 lm and also fits even in a small pool.
- Lamp only, with mini niche or kit with transformer
- Bezel in white, sand or grey
- Cable 3 m, pre-installed
Poolsana Compact Power 30 W RGB LED pool light – bulb, niche or kit
Flat RGB LED light Poolsana Compact Power, which also turns the pool into a colourful light show – 11 static colours and 7 colour programmes. The mini niche also allows installation even in small pools.
- 12 V / 30 W, luminous flux up to 1 150 lm depending on the colour
- Lamp only, with mini niche or kit with transformer
- Bezel in white, sand or grey
- Remote control with Brio RC controller (sold separately)
Floating LED light Crescent
Intex Crescent floating LED light – an inflatable glowing crescent that floats in the pool in the evening and on land becomes a lovely glowing stool or small table.
- dimensions 135 × 89 × 46 cm
- 6 colours and a 2500 mAh rechargeable battery
- IPX8 housing, load capacity up to 100 kg
- for indoor and outdoor use
Flat LED light Atlas 30W
Atlas Pool 30W / 12 V flat LED underwater light with clear white light. It suits evening swimming and a well-lit floor, whether your pool has a glass-ceramic finish or a liner (film).
- 30 W / 12 V output, diameter 30 cm
- ABS housing
- white LED light
The set does not include the transformer. You therefore connect the light to 220 V only through a suitable 12 V transformer, and only a qualified electrician installs it.















