Ozone-resistant filter Canada Ozone Atlas Pool
Canada Ozone Filter – Atlas Pool Price range: €2050.00 through €13560.00 incl. VAT
Back to products
Multiport side valve Atlas
Atlas Multiport Side-Mount Valve – Atlas Pool Price range: €114.40 through €2190.00 incl. VAT

Elongated Norm Sand Filter – Atlas Pool

Price range: €1230.00 through €6000.00 incl. VAT

The elongated Norm sand filter by Atlas Pool is a tall fibreglass filter that follows the DIN standard, with a 1.2 m sand bed. It passed a test at 4 bar pressure and also works with both fresh and sea water. Besides, the set includes a multiport valve, pressure gauge and air purge valve.

  • Five diameters – 620–1250 mm
  • Flow up to 48 m³/h, two-year warranty
  • Versions: standard, with plate, ozone-resistant

4,8 from 450 reviews of the store on Google
up to +12 300 points in “Endless Summer”
+1 000 bonus points on your second purchase · terms
Buy withtbi bank logo
-10% off the product price
Description
Norm pool sand filter

Elongated Norm Sand Filter – Atlas Pool

The elongated Norm pool sand filter is a tall fibreglass filter that follows the DIN standard. Atlas Pool in Turkey manufactures it. Workers make the body by hand from multi-layer wound fibreglass saturated with polyester resins. This therefore guarantees precision in strength and detail. The tall body also allows a sand bed 1.2 m high.

Code: APCF06Series: Norm (DIN standard)Shape: elongated (tall) tank
Red oblong sand filter Norm according to the DIN standard
Elongated Norm sand filter – standard red colour
Technical data
ManufacturerAtlas Pool
CodeAPCF06
SeriesNorm (DIN standard)
Shapeelongated tank
Materialhand-laid fibreglass with polyester resins
Diameter620–1250 mm (depending on the model)
Flow at 30 / 40 m³/h per m²9/12 – 36/48 m³/h (depending on the model)
Sand bed height1.2 m
ConnectionsØ 50 – Ø 90 (DN 40 – DN 80)
Weight37–85 kg (not specified for Ø 1050 and 1250)
Working / test pressuremax. 2 bar / 4 bar
Colourred (standard)
Included in the setmultiport valve, connecting parts, pressure gauge and air purge valve, drain plug
Warranty2 years
Atlas Pool catalogue no.ÇKTFLT620, ÇKTFLT800, ÇKTFLT920, ÇKTFLT1050, ÇKTFLT1250 (+ endings -M, -1, -M1)
Compatibility

Suitable for

  • pools filled with drinking water;
  • seawater pools;
  • flow from 9 to 48 m³/h depending on the model and the filtration velocity.

Why choose the elongated Norm pool sand filter

After manufacture, every filter passes a test at 4 bar pressure. Besides, the maximum working pressure is 2 bar. So you get a tank that passed a check before it reaches you. The filter also works with both fresh and sea water. Moreover, the elongated shape, the top cover and the manhole make it easier to fill and maintain the filter sand.

Set and construction

  • The set is complete, because it has a multiport valve, connecting parts, pressure gauge and air purge valve;
  • internal system without plate, but with "octopus"-type nozzles;
  • standard red colour*;
  • drain plug;
  • air venting and pressure gauge;
  • EPDM gaskets and stainless steel bolts;
  • sight glass (observation window);
  • top cover and manhole with a diameter of DN 220 for Ø 620–920 mm;
  • fibreglass top cover with PP reinforcement DN 395 for Ø 1050 and 1250 mm;
  • two-year warranty.

*The model comes in a standard red colour. Production in other colours is also possible on request – with a longer delivery time and a 10% surcharge.

Norm filter versions

  • Standard – internal system without plate, but with "octopus"-type nozzles (codes ÇKTFLT620–1250);
  • With plate and mushroom-type nozzles – "mushroom" internal system (codes ending in -M);
  • Ozone-resistant – double layer of polyester-vinyl ester coating, for water treated with an ozonator (ending -1);
  • Ozone-resistant with plate and mushroom-type nozzles (ending -M1).

Parameters by model of Norm pool sand filter

The data applies to all versions. The heights H1–H7 follow the manufacturer's drawing (in centimetres). However, for Ø 1050 and Ø 1250 mm the catalogue gives only some of them.

  • Norm 2 – Ø 620 mm (ÇKTFLT620). Flow is 9 / 12 m³/h (at 30 / 40 m³/h per m²). Also, the connections are Ø 50 (DN 40) and the weight is 37.00 kg. Besides, the filter takes anthracite 0.8–1.6 mm – 200 l. It also takes quartz sand 0.5–1 mm – 200 kg and quartz sand 1–3 mm – 150 kg. Finally, the heights are H1 196 / H2 190 / H3 60 / H4 17 cm. Likewise, the heights are H5 32 / H6 134 / H7 126 cm.
  • Norm 4 – Ø 800 mm (ÇKTFLT800). Flow is 15 / 20 m³/h (at 30 / 40 m³/h per m²). Also, the connections are Ø 63 (DN 50) and the weight is 65.00 kg. Besides, the filter takes anthracite 0.8–1.6 mm – 275 l. It also takes quartz sand 0.5–1 mm – 275 kg and quartz sand 1–3 mm – 200 kg. Finally, the heights are H1 198.5 / H2 192.5 / H3 80 / H4 17 cm. Likewise, the heights are H5 35 / H6 137 / H7 131 cm.
  • Norm 5 – Ø 920 mm (ÇKTFLT920). Flow is 20 / 26.5 m³/h (at 30 / 40 m³/h per m²). Also, the connections are Ø 63 (DN 50) and the weight is 85.00 kg. Besides, the filter takes anthracite 0.8–1.6 mm – 425 l. It also takes quartz sand 0.5–1 mm – 400 kg and quartz sand 1–3 mm – 375 kg. Finally, the heights are H1 213 / H2 207 / H3 98 / H4 21 cm. Likewise, the heights are H5 55 / H6 154 / H7 124 cm.
  • Ø 1050 mm (ÇKTFLT1050). Flow is 26 / 34 m³/h (at 30 / 40 m³/h per m²). Also, the connections are Ø 90 (DN 80). Besides, the filter takes anthracite 0.8–1.6 mm – 550 l. It also takes quartz sand 0.5–1 mm – 450 kg and quartz sand 1–3 mm – 275 kg. Finally, the heights are H1 202 / H6 136 / H7 166 cm.
  • Ø 1250 mm (ÇKTFLT1250). Flow is 36 / 48 m³/h (at 30 / 40 m³/h per m²). Also, the connections are Ø 90 (DN 80). Besides, the filter takes anthracite 0.8–1.6 mm – 725 l. It also takes quartz sand 0.5–1 mm – 675 kg and quartz sand 1–3 mm – 500 kg. Finally, the heights are H1 224 / H6 153 / H7 192 cm.

Useful information when choosing a sand filter

The most important factors are the surface width of the sand bed and the height of the sand fill. This is because the water enters the sand through this very surface. The dimensions of the filter itself also matter – diameter, height and the ratio between them. In fact, filters with non-standard dimensions cannot carry out the filtration process efficiently.

How to fill the filter with sand

Before filling with sand, fill the filter halfway with water. This lets you check whether the filter bottom and the collector pipe arms suffered damage in transport. You avoid cracking the filter when pouring in the sand. You also avoid sand getting into the collector pipe and from there into the pool, or a more serious incident.

  1. First pour in the specified amount of the coarsest sand, grade 3–5 mm (if the filter model requires it).
  2. Then add the medium sand, grade 1.5–3 mm.
  3. Finally, add the fine sand, grade 0.7–1.5 mm.

Reduce the water inflow speed as much as possible to keep the sand bed layered correctly. When you finish filling, keep the top level of the sand 10 cm below the upper collector pipe. Otherwise a large amount of sand may escape through the pipe. Also, do not connect the filter to a suction pump whose parameters exceed the maximum for the filter.

Important for installation

IMPORTANT! – Only a qualified technician should install the product and connect it to a suitable filter pump. Also, the installation must follow an existing structural, technological, plumbing and electrical design that a licensed designer prepared. When you connect the filter to a pump, protect the electrical system with a residual-current device (RCD). Do this according to the equipment specification! The Buyer is fully responsible for the correct installation and use of the equipment. The Buyer is also responsible for the condition of the electrical system!

Sight glass for observing the Norm oblong filterHatch of the Norm oblong filterBase and connection of the Norm oblong filterDrawing with heights H1–H7 of the Norm filter according to the DIN standard

Questions about choosing or installing?

Write to us or give us a call, because we will help you choose the right model for your pool.

Technical data
Weight66 kg
ManufacturerAtlas Pool
CodeAPCF06
SeriesNorm (DIN standard)
Shapeelongated tank
Materialhand-laid fibreglass with polyester resins
Diameter620–1250 mm (depending on the model)
Flow at 30 / 40 m³/h per m²9/12 – 36/48 m³/h (depending on the model)
Sand bed height1.2 m
ConnectionsØ 50 – Ø 90 (DN 40 – DN 80)
Weight37–85 kg (not specified for Ø 1050 and 1250)
Working / test pressuremax. 2 bar / 4 bar
Colourred (standard)
Included in the setmultiport valve, connecting parts, pressure gauge and air purge valve, drain plug
Warranty2 years
Atlas Pool catalogue no.ÇKTFLT620, ÇKTFLT800, ÇKTFLT920, ÇKTFLT1050, ÇKTFLT1250 (+ endings -M, -1, -M1)
SizeNorm 2 – 620 mm, Norm 4 – 800 mm, Norm 5 – 920 mm, 1050 mm, 1250 mm
Versionstandard, with plate and mushroom-type nozzles, ozone-resistant, ozone-resistant with plate and mushroom-type nozzles
About Atlas Pool
Turkey · Official representative

Atlas Pool – filters and equipment for swimming pools.

Turkish manufacturer of filters, pumps and pool equipment, imported directly by Baseini.NET to Bulgaria.

LED light Atlas 18W - RGB multicolour
226products
in the catalog
2007year of foundation
4000 m²production base
226products in the catalog
R&Din-house development department

Filtration and equipment from Istanbul

Atlas Pool is a manufacturer with its own modern facility in Istanbul, specializing in equipment for private and public swimming pools. The range includes polyester and stainless steel sand filters, pumps, lighting, ladders, skimmers, grates and check valves.

As an official representative and direct importer for Bulgaria, we offer you Atlas Pool products without intermediaries – with availability, selection consultation and service parts from one store.

Own development activity

Atlas Pool’s R&D department develops new products every year, and the equipment is exported to the Balkans, the Middle East, Asia and North Africa.

PVC pre-filter Atlas
PVC pre-filter Atlas
ABS skimmer model Standard
ABS skimmer model Standard
LED fountain platform
LED fountain platform
LED light Chrome Frame 3W/12V - coloured
LED spotlight Chrome Frame 3W/12V-…
In the range

Atlas Pool products with us

Pool filters
Lighting and accessories
Atlas Skimmers
HWO ozonators
Production in Istanbul
Official representative for Bulgaria
ON PAYMENT
Goods on installment

The pool you can afford!

See the best options to have the pool of your dreams

FINANCING OPTION WITH

Unicredit Bulbank

UniCredit Consumer Financing is part of UniCredit Group – the largest banking group in Eastern Europe.

UniCredit logo – purchase on installments

Why choose UniCredit Consumer Financing?

  • Simplified documentation – only an ID card is required when applying.
  • From €76.69 to €25 564.59, depending on your needs and wishes.
  • Fast approval.
  • Fixed interest rate.
  • No bank commissions when paying installments, at any branch of Unicredit Bulbank.
  • Repayment term from 3 to 72 months, according to your wishes.
  • Affordable monthly installments.
  • No hidden fees or commissions.
  • You don't have to invest a large amount of money in a single purchase.
  • Possibility of alternative payments via E-Pay and ATM.

For additional information:
Call 0700 15 600 at the price of a local call for BTC subscribers or www.ucfin.bg

FINANCING OPTION WITH

TBI Bank

TBI Bank provides you with a quick and easy opportunity to purchase the desired swimming pools.

TBI Bank logo – purchase on installments

7 important reasons to choose TBI Bank:

  • EASY: you buy various types of goods worth over €76.69 without paying the full amount at the time of purchase.
  • FAST: within 30 minutes you receive an approval response.
  • NO DOWN PAYMENT: You receive your pool without a down payment.
  • ADVANTAGEOUS: you choose your own monthly payment or one of the promotional financing schemes that the company offers at a low additional cost.
  • NO PENALTY INTEREST: Repayment terms are from 3 to 36 months. In case of early repayment of the loan, you do not pay penalty interest and fees.
  • CONVENIENT: you repay the amount in equal monthly installments, which you pay in the most convenient way for you: by bank transfer, by transfer to your current account, over the internet via "E-Pay" or if you prefer to order your installments yourself via an ATM, this can be done via a credit or debit card with the selection of "B-pay" and the merchant code: 65,000.
  • NO FORMALITIES: You receive approval online or on the spot in our shop. The financing application is completed by a member of our staff. Up to €5 112.92 including financing costs.
CONTACT FORM

Do you have any questions?

We are here to answer and assist. Contact us:

pool on instalments

    JPG, PNG or WebP, up to 10 MB.

    When ordering each product, you will find a "Buy on Installment" option. No personal presence is required.
    When ordering each product, you will find a "Buy on Installment" option. No personal presence is required.
    DELIVERY AND WARRANTY

    Delivery time

    • The maximum delivery time for all products is up to 10 working days.
    • Most products are in stock and can be received in a matter of days.

    Price and free shipping

    • The online store automatically calculates the price with the selected courier.
    • Free delivery on orders over €150 to a Speedy office, for Bulgaria only.
    • Below this threshold, delivery is at the customer’s expense according to the courier’s tariff.
    • You can pick up the product in person from the warehouse or office store after prior arrangement.

    Full terms and conditions: Delivery terms →

    Frequently bought together

    €1230.00 incl. VAT
    €22.10 incl. VAT
    €22.99 incl. VAT
    €22.99 incl. VAT
    €1298.08 incl. VAT
    For 4 items