Poolsana return nozzle for pool – for 32/38 mm hose or Multiflow for Ø 50 mm pipe
Price range: €7.99 through €25.99 incl. VAT
The return nozzle brings the filtered water back into the pool. It is available in white or grey for a 32/38 mm hose, as well as Multiflow for a rigid Ø 50 mm pipe.
- Adjustable nozzle eye
- Gaskets included
- Recommended wall hole 60 mm
- Multiflow – with a 14 mm ball, expandable to 25 mm
Poolsana return nozzle for pool – for 32/38 mm hose or Multiflow for Ø 50 mm pipe
The return nozzle brings the filtered water from the sand filter back into the pool through the piping. It is available in three models: white and grey for a 32/38 mm hose, and Multiflow for a rigid Ø 50 mm pipe. This way you choose the exact type for your pool.
| Manufacturer | Poolsana |
|---|---|
| Models | White and grey for 32/38 mm hose; Multiflow for Ø 50 mm pipe |
| Adjustment | Movable nozzle eye; Multiflow – ball 14, 20 or 25 mm |
| Recommended hole in steel wall | 60 mm |
| Multiflow material | Impact-resistant ABS plastic |
| Multiflow connection | Glued Ø 50 mm, 2″ external thread |
| Gaskets | Included in the set |
Nozzles for 32/38 mm hose
The white and grey nozzles are ideal for above-ground steel pools, round and figure-eight. They are suitable wherever the pipes remain accessible. The nozzle eye is adjustable. The nozzle is easy to install and is for a 32/38 mm hose.
The recommended hole in the steel wall is 60 mm.
Gaskets are included. Sometimes they are supplied as a single double gasket. In that case, separate them. One goes behind the liner and the other in front of it.
The 32/38 mm sleeve is screwed into the nozzle with a 1½″ thread and is easy to remove. The free 1½″ internal thread can accept a ball valve. With it you shut off the nozzle when working on the pipes or the filter.
- White and grey – for 32/38 mm hose
- Multiflow – for rigid Ø 50 mm pipe
- Adjustable nozzle eye
- Recommended hole in steel wall: 60 mm
Multiflow return nozzle for steel and masonry pools
Multiflow is made of impact-resistant ABS plastic. It is suitable for rigid Ø 50 mm pipe. It fits especially well on masonry and concrete pools with a wall penetration. Its flange sits flush with the penetration and looks clean.
It can also be used in steel pools. The two small safety screws in the nozzle are not needed for installation and can be removed.
The kit includes a liner flange with gaskets and a 14 mm Multiflow ball. This makes it easy to replace the liner even in pools that are already installed. With a powerful pump the ball can be enlarged to 20 or 25 mm using the included tool. The connection is glued Ø 50 mm on the inside and 2″ thread on the outside.
Where to place the return nozzles
The position depends on the type and size of the pool. For many steel and rectangular pools, two nozzles opposite the skimmer are used. This way the water circulates better. In other cases one nozzle is placed next to the skimmer and moves the water in a circle.
Not sure this is your part?
Send us the model of the unit and a photo of the old part. We will check compatibility before you order.
| Manufacturer | Poolsana |
|---|---|
| Models | White and grey for 32/38 mm hose; Multiflow for Ø 50 mm pipe |
| Adjustment | Movable nozzle eye; Multiflow – ball 14, 20 or 25 mm |
| Recommended hole in steel wall | 60 mm |
| Multiflow material | Impact-resistant ABS plastic |
| Multiflow connection | Glued Ø 50 mm, 2″ external thread |
| Gaskets | Included in the set |
| Model | White for 32/38 mm hose, Grey for 32/38 mm hose, Multiflow for Ø 50 mm pipe |
Germany, Nuremberg · Exclusive representativePoolsana – pools and equipment from Germany.
German specialist in swimming pools, saunas and accessories, founded in 2005 in Nuremberg.
in Nuremberg
A swimming pool for every home at a reasonable price
Poolsana was founded in 2005 in Nuremberg by a local pool and sauna construction company with many years of experience in the industry. Its goal is to make it possible for every property owner to afford their own pool or sauna.
Poolsana’s technical department checks the compatibility of pumps, sand filters and other components, and the warehouse of over 3000 m² guarantees fast delivery. At Baseini.NET we are the exclusive representative for Bulgaria.
The components in Poolsana kits are selected and tested to work together – no surprises during installation.
Poolsana products in our shop
The pool you can afford!
See the best options to have the pool of your dreams
Unicredit Bulbank
UniCredit Consumer Financing is part of UniCredit Group – the largest banking group in Eastern Europe.
Why choose UniCredit Consumer Financing?
For additional information:
Call 0700 15 600 at the price of a local call for BTC subscribers or www.ucfin.bg
TBI Bank
TBI Bank provides you with a quick and easy opportunity to purchase the desired swimming pools.
7 important reasons to choose TBI Bank:
Do you have any questions?
We are here to answer and assist. Contact us:
Delivery time
- The product is delivered on pre-order, delivery time up to 20 working days.
- We order it specially for you from the manufacturer.
Price and free shipping
- The online store automatically calculates the price with the selected courier.
- Free delivery on orders over €150 to a Speedy office, for Bulgaria only.
- Below this threshold, delivery is at the customer's expense according to the courier's tariff.
- You can pick up the product in person from the warehouse or office store after prior arrangement.
Full terms and conditions: Delivery terms →
Frequently bought together
Poolsana PLUS built-in skimmer for German steel pools (Poolsana) – white or grey, with or without return nozzle
Poolsana PLUS built-in skimmer for German steel pools (Poolsana) – white or grey, with or without a return nozzle for 32/38 mm hose. Made of ABS and easy to install.
- Suitable for round, figure-eight and oval steel pools
- 1½″ female thread connection, 32/38 mm adapter included
- With skimmer basket, flap, suction plate and flange faceplate
