Round pool thermometer 19 cm
€15.56 incl. VAT
Round analog pool thermometer MTH with large 19 cm dial, temperature range 0–40 °C, stainless steel probe approx. 27 cm and attachment cord. Works without batteries.
- 19 cm – dial diameter
- 0–40 °C – temperature range
- ≈ 27 cm – stainless steel probe
Round pool thermometer 19 cm with probeWater monitoring without batteries
The MTH round pool thermometer, 19 cm, combines a large dial with a stainless steel probe. The scale from 0 °C to 40 °C shows the water temperature without batteries.

Round pool thermometer 19 cm – description
Good pool control starts with knowing how warm the water is. This thermometer gives you the answer in seconds, and the attachment loop keeps it close at hand.
The analogue device is suitable for families who want to monitor the temperature without electronics, settings and battery changes.
MTH · temperature control
Technology and convenience

Round thermometer with a large dial
Clear reading and reliable control of water temperature thanks to the large dial and extended stainless steel probe.
0–40 °C · dial 19 cm · probe approx. 27 cm
See more pool accessories →
Water temperature visible at a glance
This analog thermometer allows you to quickly check the temperature of your pool without batteries or settings. Its clean design makes it easy to read during daily maintenance.
Large dial
The round dial with a diameter of 19 cm has a clear scale from 0 °C to 40 °C for convenient temperature reading.
Measuring below the surface
The extended probe, about 27 cm long, measures the temperature in the water and helps to obtain a representative value.
Designed for daily pool control
Large dial
Convenient reading even from a distance.
Extended probe
Stainless steel for stable measurement in water.
Attachment cord
Allows attachment to the edge for easy finding and removal.
Main features
0–40 °C
Temperature range
19 cm
Dial diameter
≈ 27 cm
Probe length
Stainless steel
Probe material
Method of use
Immerse the probe in the water and wait for the reading to stabilize. Use the tie to secure the thermometer to the edge of the pool and prevent it from moving away. Check the temperature before adjusting the heating or using the pool.
Recommended maintenance
Rinse the thermometer with clean water after prolonged use. Protect the dial from impacts and store the device protected from frost and strong sunlight when the pool is not in use.
Everything important about the product
Are batteries required?
No. This is an analog thermometer that works without batteries or electrical power.
What temperature range does it measure?
The scale allows reading water temperature from 0 °C to 40 °C.
Can it stay in the pool?
Yes, it can be secured with the tie in normal use. For longer service life, remove it in freezing conditions, extended periods without maintenance, or extreme weather exposure.
Why choose a round pool thermometer 19 cm
A clear scale, a sturdy probe and no settings.
Dial 19 cm
The large round dial is easy to read.
Probe ≈ 27 cm
The stainless steel probe measures in the water.
Without batteries
No electrical power supply is needed.
Attachment cord
The device clips onto the edge and does not drift away.
Frequently asked questions
What is the dial diameter?
The dial has a diameter of 19 cm.
How long is the probe?
The probe is made of stainless steel and is about 27 cm long.
What temperature range does it have?
The scale is from 0 °C to 40 °C.
Does it use batteries?
No, this is an analogue thermometer without batteries.
What is the attachment point for?
Lets you secure the device to the pool edge.
Which thermometer should I choose for everyday monitoring?
This thermometer is convenient for everyday monitoring thanks to the large dial and the probe.
Blog
Do you also need a water test?
Complete the thermometer with pool testers or write to us for advice on choosing.
| Weight | 0.2 kg |
|---|---|
| Dimensions | 27 × 19 × 27 cm |
| Thermometer type | Analogue |
| Type | round analogue thermometer |
| Dial | 19 cm |
| Range | from 0 °C to 40 °C |
| Probe | stainless steel, about 27 cm |
| Batteries | not required |
| Manufacturer | MTH |
| Fastening | tether loop for attaching to the pool edge |
Germany, Waldkraiburg · Made in GermanyMTH – German pools and covers.
Manufacturer of swimming pools, liners and covers with over 50 years of history, all made in Bavaria.

in Germany
Traditional production in Bavaria
MTH started in 1970 with electric heaters and cartridge filters for private pools. In 1980, the production of above-ground pools and PVC liners began, and from 1986, the Waldkreiburg plant added heat welding and high-frequency welding.
Since 2006, MTH has been part of the global Fluidra group, but the products continue to be manufactured entirely in Germany under its own brand – steel pools, liners, solar covers and skimmers.
All MTH products are manufactured in the traditional factory in Waldkreiburg, Bavaria.




MTH products in our shop
Delivery time
- The maximum delivery time for all products is up to 10 working days.
- Most products are in stock and can be received in a matter of days.
Price and free shipping
- The online store automatically calculates the price with the selected courier.
- Free delivery on orders over €150 to a Speedy office, for Bulgaria only.
- Below this threshold, delivery is at the customer’s expense according to the courier’s tariff.
- You can pick up the product in person from the warehouse or office store after prior arrangement.
Full terms and conditions: Delivery terms →











