Inflatable winter cover MTH Air Protect UNI – for oval pools 5.25 x 3.20
€757.62 incl. VAT
4,8 from 450 reviews of the store on GoogleInflatable winter cover MTH Air Protect UNI – for oval pools 5.25 x 3.20
Inflatable winter cover MTH Air Protect UNI – for oval pools 5.25 x 3.20. Inflatable winter cover, made in Germany, designed for oval pools, made of extremely tear-resistant polyester fabric with PVC coating on both sides and a density of 580 g/m², equipped with an inlet and outlet valve and an adapter for connecting to an air blower, with metal rings built into the periphery approximately 60 cm apart for secure attachment with a tension rope, and a strong elastic rope with a thickness of 6 mm is also included in the set. This size is 5.25 x 3.20. The manufacturer is MTH from Germany. In addition, the material is polyester with PVC coating on both sides, 580 g/m² per side. Therefore, after inflating, a stable dome is formed. Also, the rings are approximately 60 cm apart, and the rope is 6 mm. The water level in autumn and winter drops to no more than 40 cm from the edge. For other shapes, see protective covers. You can put it under the cover. air bag.
580 g/m²
Polyester with PVC coating on both sides, 580 g/m² per side.
Rings every 60 cm
Metal rings around the perimeter and 6 mm elastic rope.
Valve Ø20 mm
Valve adapter for connection to an air blower.
Winter dome
After inflating, a dome is formed that drains rain, snow, and leaves.
Inflatable dome in winter
Once inflated, the double material forms a stable dome over the pool. It drains rainwater and prevents snow, leaves and dirt from accumulating.
Important during installation
The water level in autumn and winter should be lowered so that the distance to the edge does not exceed 40 cm. It is not recommended for a wide upper edge of about 4–5 cm and for Frame pools that are not perfectly round or rectangular. With a wide upper edge of about 4–5 cm, especially with a corrugated steel wall, the cover may get stuck when pumping. Such an edge is usually metal and may have sharp parts that can damage the cover.
Kit and fastening
The set includes a valve adapter and an elastic rope. The rings are approximately 60 cm apart. Ground anchors are available as an additional accessory. Inflatable winter cover MTH Air Protect UNI – for oval pools is 5.25 x 3.20 and is used as described above. The valve adapter has a diameter of 20 mm and is connected to an air blower. The rope is threaded through the rings in a zigzag pattern and then tightened. For freestanding pools, a plastic-coated steel rope can be used, tensioned with a ratchet; the steel rope and ratchet are available as an additional accessory.
How to easily install the Air Protect cover
The MTH Air Protect UNI cover is supplied with a durable elastic cord. This secures the cover securely.
Depending on the design of the pool, there are different options for tensioning. It is suitable for freestanding pools and fully in-ground pools. Special cases are also possible, for example a partially in-ground pool with a wall or podium on one side.
- It forms an inflatable dome over the pool.
- It prevents rain, snow, leaves and dirt from collecting on the cover.
- The set includes metal rings, an air blower adapter and 6 mm elastic rope.
| Pool size | Number of mounting holes |
|---|---|
| 4,90 x 3,00 m | 24 |
| 5,25 x 3,20 m | 26 |
| 6,00 x 3,20 m | 29 |
| 6,30 x 3,60 m | 31 |
| 7,00 x 3,50 m | 33 |
| 8,00 x 4,00 m | 36 |
Frequently asked questions
Does the cover need to be inflated?
Yes. Once inflated, the double material forms a stable dome that sheds rain and snow.
How much water should be lowered in winter?
The level is lowered so that the distance to the edge does not exceed 40 cm.
Does it fit Frame pools?
Not recommended for wide top edges of around 4–5 cm and for Frame pools that are not perfectly round.
How is it attached?
Metal rings about 60 cm apart and 6 mm elastic rope. Ground anchors are available separately.
| Dimensions | 5.25 x 3.20 |
|---|---|
| Cover size | 5.25 x 3.20 m |
| Pool shape | Oval pool |
| Cover type | Inflatable winter cover |
| Material | Polyester fabric with PVC coating |
| Density | 580 g/m² |
| Series | Air Protect UNI |
| Manufacturer | MTH |
| Fastening | Metal rings and elastic cord |
Germany, Waldkraiburg · Made in GermanyMTH – German pools and covers.
Manufacturer of swimming pools, foils and covers with over 50 years of history, all made in Bavaria.
in Germany
Traditional production in Bavaria
MTH started in 1970 with electric heaters and cartridge filters for private pools. In 1980, the production of above-ground pools and PVC liners began, and from 1986, the Waldkreiburg plant added heat welding and high-frequency welding.
Since 2006, MTH has been part of the global Fluidra group, but the products continue to be manufactured entirely in Germany under its own brand – steel pools, liners, solar covers and skimmers.
All MTH products are manufactured in the traditional factory in Waldkreiburg, Bavaria.
MTH products with us
The pool you can afford!
See the best options to have the pool of your dreams
Unicredit Bulbank
UniCredit Consumer Financing is part of UniCredit Group – the largest banking group in Eastern Europe.
Why choose UniCredit Consumer Financing?
For additional information:
Call 0700 15 600 at the price of a local call for BTC subscribers or www.ucfin.bg
TBI Bank
TBI Bank provides you with a quick and easy opportunity to purchase the desired swimming pools.
7 important reasons to choose TBI Bank:
Do you have any questions?
We are here to answer and assist. Contact us:
Delivery time
- The maximum delivery time for all products is to 10 working days.
- Most products are in stock and can be received in a matter of days.
Price and free shipping
- The online store automatically calculates the price with the selected courier.
- Free shipping over 150 euros / 293,37 BGN. to a Speedy office, only for Bulgaria.
- Below this threshold, delivery is at the customer’s expense according to the courier’s tariff.
- You can pick up the product in person from the warehouse or office store after prior arrangement.
Full terms and conditions: Delivery terms →
Installation and maintenance instructions
Full technical translation into Bulgarian with fully translated assembly markings and preserved dimensional diagrams, parts list and instructions for safe use.
Document: Instruction Comfort 3BPZ0138 · Bulgarian language · PDF · 559 KB · 6 pages
Important: Secure the anchors securely in the concrete slab, maintain pH 7,0-7,4 and free chlorine below 1 mg/l. The ladder is not intended for salt electrolysis pools.
Installation and safe use instructions
Full technical translation into Bulgarian for Swing ladders 0,90 / 1,07 / 1,20 m. Contains safety instructions, all assembly steps and figures, maintenance and parts list.
Model: Swing 1,20 m · Catalog number: 3BVZ0290 · Bulgarian language
