Pool cover roller and accessories

A solar cover is only useful if it is easy to put on and take off. With a pool cover roller you can roll it up in seconds without dragging it on the ground and without it tearing. Here you will find winders, telescopic rods and small accessories for fastening and repair.

Poolsana PROFI Deluxe Cover Reels

The PROFI Deluxe series cover reels are aluminium devices. They come in stationary and mobile versions – for pools with a width of 1.20–4.20 m and 1.40–5.20 m. There is also a special model for above-ground pools 1.60–6.00 m. The stationary unit stays in one place, while the mobile one can be moved.

Mountfield stands and telescopic poles

The mobile, movable and stationary stand are combined with a telescopic reel tube of 2.7–4.4 m, 3.7–5.4 m or 5.4–7.1 m – choose the length according to the width of the pool. This way the stand with the telescopic tube works as a pool cover winding reel.

How to Wind the Solar Cover

Cover reels are used like this: the cover is attached to the reel at one end and wound evenly across its whole width. When wound up, it does not lie on the ground and does not get in the way around the pool. This way the pool is covered and uncovered in seconds, and the cover is protected from dirt and tearing.

How to Choose Cover Reels

  • Pool width. First measure its width. The reel must match it, which is why cover reels and telescopic tubes come in several ranges. If the pool is above-ground, see the special model for 1.60–6.00 m.
  • Stationary or mobile. The stationary unit stays in place, while the mobile one can be moved around the pool. Choose according to the space you have next to the pool.
  • Fastening. Connect the cover to the reel with clip caps, adhesive or rubber straps – see the next section.

Clips, tapes and repairs

Hufer clip caps (set of 10), adhesive and rubber straps (sets of 8) connect the cover to the roller, and the 100 × 10 cm self-adhesive repair tape seals small tears. It is a good idea to keep such small accessories at hand for every pool cover reel.

You will find the covers themselves in the thermal covers and pool covers sections.

Showing all 24 results

Dome adapter for above-ground pools with a steel wall Mountfield (2 pcs)

€48.20 incl. VAT

Pool House Control dome adapter – for pools with a solid steel wall.

  • In the set: 2 adapters (for the left and the right side)
  • Allows the dome to be installed on Orlando-type pools too
  • No construction work

Cover holder 1 for pool telescopic pole

€2.04 incl. VAT

Original pool cover holder (version 1) for Mountfield roll-up telescopic poles. Plastic bar with two holes.

  • Version 1 – straight bar with two holes
  • For telescopic poles 2.7–4.4 m, 3.7–5.4 m and 5.4–7.1 m
  • Original Mountfield part

Cover holder 2 for pool telescopic pole

€2.21 incl. VAT

Original pool cover holder (version 2) for Mountfield roll-up telescopic poles. Bar with two holes and an elongated slot.

  • Version 2 – bar with slot and two holes
  • For telescopic poles 2.7–4.4 m, 3.7–5.4 m and 5.4–7.1 m
  • Original Mountfield part

Cover rope for above-ground pool, 30.48 m

€42.10 incl. VAT

Cover rope for above-ground pools. Length 30.48 m, diameter 2 mm. Suitable for Mountfield Premium and Supreme covers and mesh covers.

  • Length 30.48 m, diameter 2 mm
  • Warranty 2 years
  • Red coating, coiled on a reel

Cover Rope Tensioner for Pool

€9.81 incl. VAT

Metal tensioner with a handle for the rope of the cover of an above-ground pool. Easy to replace yourself and ordered directly from Baseini.NET.

  • For above-ground pools
  • Metal body with lever
  • Original Mountfield part
  • Suitable for self-installation

Tensioner for Azuro protective cover

€6.20 incl. VAT

Metal weight – a spare part from the Azuro protective cover package. It tightens the cover cord around the pool wall. Suitable for Azuro pools and other pools with a metal wall.

  • Material: metal
  • Compatible with Azuro protective covers
  • Manufacturer: Mountfield

Sinking ground anchor

€5.74 incl. VAT

Ground anchor for secure fastening of the tensioning ropes of a pool cover.

  • Ø 12 mm – aluminium bush
  • 6 cm – needle length
  • Stainless – steel for the needle

Fixed floor anchor 6 mm, pin length 90 mm

€4.59 incl. VAT

Fixed 6 mm floor anchor, designed for securely attaching guy ropes to an inground pool cover, with a sturdy 90 mm long pin, ensuring stable and reliable fixation.

  • Ø 6 mm – diameter
  • 90 mm – pin length
  • Aluminium – flange plate

Cord for Azuro protective cover

€16.70 / pcs incl. VAT

Spare cord for lacing around the pool wall. It is part of the Azuro protective cover kit and tightens it securely.

  • Type: spare cover cord
  • Compatibility: Azuro protective covers
  • Suitable for Azuro pools and other pools with metal wall

Stationary reel PROFI Deluxe for solar pool cover 1.30–4.50 m
-9% New

Stationary reel PROFI Deluxe for solar pool cover 1.30–4.50 m

Original price was: €239.00.Current price is: €218.00. incl. VAT

Stationary reel PROFI Deluxe for solar pool covers with a width from 1.30 m to 4.50 m. The model has polished stainless steel stands, an aluminum reel shaft and a stainless steel hand crank. It is mainly suitable for elongated pools with straight long sides, such as oval pools. The set includes 8 fixing straps for the solar cover.

reel for solar cover
-9% New

Mobile reel PROFI Deluxe for solar cover 1.20–4.20 m – aluminium and stainless steel

Original price was: €240.00.Current price is: €218.90. incl. VAT

Mobile reel PROFI Deluxe for solar cover, suitable for pools with a width of 1.20 m to 4.20 m. The design includes an aluminum telescopic axle, polished stainless steel stands, wheels on one side and a hand wheel for easier reeling. The set includes 8 fixing straps for attaching the solar cover.

Mobile reel PROFI Deluxe for a solar cover – wheels and support leg
-28% New Mobile

Mobile reel PROFI Deluxe for solar cover 1.40–5.20 m – aluminium and stainless steel

Original price was: €350.00.Current price is: €251.90. incl. VAT

Mobile reel PROFI Deluxe for solar cover, suitable for pools with a width of 1.40 m to 5.20 m. It has a telescopic aluminum reel shaft, polished stainless steel stands, wheels on one side and 8 straps for attaching to the solar cover.

reel for above-ground pools
-20% New

Reel PROFI Deluxe for above-ground pools 1.60–6.00 m – aluminium and stainless steel

Original price was: €450.00.Current price is: €362.00. incl. VAT

The PROFI Deluxe solar cover reel is specifically designed for above-ground, partially in-ground, and freestanding pools with a width of up to 6.00 m. This model features adjustable height, a telescopic aluminum axle, polished stainless steel supports, and 8 straps for attaching to the solar cover.

Mobile stand for winding solar pool cover

€126.60 incl. VAT

Movable rod stand for roller winding of a solar thermal cover;

Mobile stand for winding solar pool cover

€144.00 incl. VAT

Mobile pole stand for rolling up a solar thermal cover;

Stationary stand for winding solar pool cover

€166.00 incl. VAT

Stationary rod stand for roller winding of a solar thermal cover;

Telescopic reel pole 2.7-4.4 m

€251.40 incl. VAT

Telescopic roller rod measuring 2.7-4.4 m for a stand for rolling up a solar thermal cover;

Telescopic reel pole 3.7-5.4 m

€309.00 incl. VAT

Telescopic roller rod measuring 3.7-5.4 m for a stand for rolling up a solar thermal cover;

Telescopic reel pole 5.4–7.1 m for winding solar cover

€336.00 incl. VAT

Telescopic roller rod measuring 5.4-7.1 m for a stand for rolling up a solar thermal cover;

clip caps for solar cover
-13% New

Clip caps Hufer for solar cover – set of 10, blue

Original price was: €19.00.Current price is: €16.49. incl. VAT

Set of 10 blue Hufer clip caps for a solar pool cover. Suitable for fastening a strap, rope or rubber band to the cover. The snap mechanism allows installation without any special tool.

Repair tape for solar cover 100 × 10 cm – self-adhesive

€16.49 incl. VAT

Self-adhesive repair tape for repairing solar covers and solar film. The tape is sized 100 × 10 cm, is reinforced with a textile structure and can be cut with scissors to the required shape or length.

Adhesive tape set for solar cover reel – black straps, white adhesive mounting plates and buckles
-27% New

Adhesive tape set for solar cover reel – 8 pcs

Original price was: €27.00.Current price is: €19.79. incl. VAT

A set of Hufer adhesive strips for connecting a solar cover to a reel. Includes 8 strips and 8 plastic clips, each strip being about 170 cm long. Suitable as a spare or additional set for easier fastening of the solar cover to the winding axle.

rubber straps for solar cover
-15% New

Rubber strap set Hufer for solar cover reel – 8 pcs

Original price was: €26.00.Current price is: €21.99. incl. VAT

Set of 8 Hufer rubber straps with an approximate length of 148 cm for connecting a solar cover to a reel. Fitted with plastic pins for attachment to the shaft and to ready-made holes or eyelets.

Built-in floor anchor for wooden decking

€13.79 incl. VAT

Floor anchor for attaching tension ropes to a pool cover.

  • Aluminium – flange plate
  • 2.5 cm – pin length
  • Stainless – steel for the pin