BROMINE Bromine Tablets 20 g – 1 kg for Hot Tubs and Pools
€27.60 incl. VAT
BROMINE is a bromine-based product in slow-dissolving 20 g tablets for disinfecting the water in warm swimming pools, hot tubs and whirlpool baths/spas.
- Pack size: 1 kg.
- 20 g tablets.
- Initial dose for first filling: 20 g per 1 m³ of water.
- Maintenance dosing according to the measured bromine level.
- For professional use.
Use biocides safely.
Always read the label and the product
information before use.
Bromine tablets for hot tubs and warm pools
BROMINE in a 1 kg pack is a product in slow-dissolving 20 g tablets for disinfecting the water in warm swimming pools, whirlpool baths and spa facilities.
Bromine products are used for maintaining warm water, including in facilities with a temperature above 30°C. Dosing depends on the water volume, the label instructions and the measured bromine level.
Pack size offered: 1 kg only.
Purpose
The product is intended for treating the water in warm swimming pools and whirlpool baths/spas. The tablet form allows placing it in the place intended for dosing according to the label and the instructions for the facility.
Regular measurement of pH and residual bromine is part of maintenance. The amount of product for subsequent dosing is determined according to the test results.
Dosage and water control
| Initial dose for first filling | 20 g of product per 1 m³ of water — one tablet per 1000 l |
|---|---|
| Maintenance dosing | As needed and according to the measured bromine level |
| pH before dosing | 7.2–7.8 according to the label provided |
| Bromine level in swimming pools | 2–3 mg/l according to the label |
| Bromine level in whirlpool baths/spas | 2–4 mg/l according to the label |
Important: the dose of 20 g/m³ refers to the weight of the product, not to a target bromine concentration in the water. Follow the label of the specific pack and check the level with a suitable test.
Method of use
- Measure the pH. Before dosing, bring it into the range stated on the label with a suitable pH minus or pH plus product. Apply the products separately, according to their instructions.
- Place the required tablets in a skimmer or a floating dosing capsule, as stated on the label, if compatible with the instructions for the facility.
- Measure the bromine level with a suitable test and determine the maintenance dosing according to the result.
- Do not allow direct contact of the tablets with the lining of the pool or the tub.
Do not mix the product with other chemicals. Do not use a dispenser containing another product or its residues.
Product data
| Name | BROMINE |
|---|---|
| Type | Bromine-based water disinfection product |
| Shape | Slow-dissolving tablets |
| Tablet weight | 20 g |
| Net quantity | 1 kg |
| Composition | 1-Bromo-3-chloro-5,5-dimethylhydantoin |
| User category | Professional |
Danger — read before use
- May intensify fire; oxidiser.
- Harmful if swallowed.
- Causes severe skin burns and serious eye damage.
- May cause an allergic skin reaction.
- Very toxic to aquatic life with long-lasting effects.
- Contact with acids liberates toxic gas.
- Do not use together with other products. May release dangerous gases — chlorine.
Keep out of reach of children, away from heat, sources of ignition and combustible materials. Wear protective gloves, protective clothing and eye and face protection according to the label.
Use biocides safely. Always read the label and the product information before use.
Label and instructions
See the full label for warnings, storage and what to do in an incident. The label shown is common to several pack sizes; this product page offers only the 1 kg pack.
| Product | BROMINE |
|---|---|
| Type of product | Bromine-based disinfectant |
| Shape | Slow-dissolving tablets |
| Tablet weight | 20 g |
| Pack size | 1 kg |
| Application | Warm pools, hot tubs and spas |
| User category | Professional |
| Composition | 1-Bromo-3-chloro-5,5-dimethylhydantoin |
Frequently bought together
BROMINE Bromine Tablets 20 g – 1 kg for Hot Tubs and Pools
BROMINE is a bromine-based product in slow-dissolving 20 g tablets for disinfecting the water in warm swimming pools, hot tubs and whirlpool baths/spas.
- Pack size: 1 kg.
- 20 g tablets.
- Initial dose for first filling: 20 g per 1 m³ of water.
- Maintenance dosing according to the measured bromine level.
- For professional use.
Use biocides safely.
Always read the label and the product
information before use.
