8 µF Capacitor with Flat Terminals for Filter Pump
€11.20 incl. VAT
8 µF capacitor for the filter pump motor, with flat connection terminals. Original Mountfield part. Original part for exact replacement. Order it easily online from Baseini.NET and then get your equipment back in order.
- Capacity 8 µF
- For Azuro and PRO sand filters
- Original Mountfield part
8 µF Capacitor with Flat Terminals for Filter Pump
A good pump capacitor is important, since it gives the motor a stable start. Also, this 8 µF water pump capacitor has flat terminals for connection. Specifically, it suits the pumps of Azuro and PRO sand filters.
| Manufacturer code | DS123456792- |
|---|---|
| Manufacturer | Mountfield |
| Type | capacitor |
| Capacity | 8 µF |
| Connection | with flat connection terminals |
| Suitable for | Azuro and PRO sand filters |
Suitable for
- PRO S144T sand filter
3BTE0355, 2011–2016 - PRO S166T sand filter
3BTE0356, 2011–2016 - Azuro 5 sand filter
3BTE0547, from 2021 - Azuro 5 m³/h sand filter
3BTE0058, 2002–2011 - Azuro 7 m³/h sand filter
3BTE0060, 2005–2011 - Azuro 6 m³/h sand filter
3BTE0060, 2003–2005
Water pump capacitor 8 µF – when to replace it
The capacitor helps the pump's electric motor start and also run smoothly. Eventually it ages over the years. The motor then hums but does not turn. Another sign is a slow start or the pump heating up.
Before you order, check the capacity of the old capacitor. The body also has the value printed on it. The new part must have the same capacity, and likewise you must connect it in the same way.
Mountfield selects the original capacitor specifically for these filters. So you do not waste time on trials and wrong sizes. You also receive a part with a precisely known capacity. Therefore your pump will work as intended.
How to install the 8 µF capacitor for water pump
- Firstly, switch off the pump and unplug the power cable from the socket.
- Then wait a few minutes so that the capacitor discharges.
- Afterward, remove the cover of the motor's terminal box.
- Also note down or photograph how the wires connect.
- Finally, replace the capacitor and put the cover back.
Advantages of the original part
- Exact match with the dimensions and also the fixings.
- Quality selected by the manufacturer.
- Easy and quick replacement without modifications.
- Peace of mind, because the part fits your model.
- Lower risk of repeat repairs.
How to choose the right part
Firstly, check the model of your equipment. Then compare it with the list above. If you have a code or a photo of the old part, compare them with ours. If in doubt, write to us and we will help you choose.
Working with electricity is a serious matter. If you are not sure, leave the replacement to a specialist. Thus you can be at ease about safety.
Check the small details at the start of the season. One worn part often leads to a bigger problem. Therefore it is good to keep a spare part at hand. Thus the repair takes minutes rather than days. Baseini.NET also offers a wide choice of spare parts for pools.
If your pump has a cable connection, see the 8 µF capacitor with cable. You often replace the pump mechanical seal and the splash ring during the same maintenance. You will also find more parts in the parts for filters and equipment category and in the pool spare parts.
Not sure whether this is your part?
Send us the model of the unit and also a photo of the old part. We will check compatibility before you order.
| Manufacturer | Mountfield |
|---|---|
| Manufacturer code | DS123456792- |
| Type | capacitor |
| Capacity | 8 µF |
| Connection | with flat connection terminals |
| Suitable for | Azuro and PRO sand filters |
Czech Republic · Exclusive representativeMountfield – family pools from the Czech Republic.
Exclusive representative of the largest European manufacturer — Baseini.NET, for Bulgaria.
per year
The largest European manufacturer
Baseini.NET is the official representative for Bulgaria, Romania and Turkey of the Czech manufacturer Mountfield, the largest producer of family pools in Europe. Twenty years of experience, over 1500 employees, a sales network of 71 company-owned garden hypermarkets in the Czech Republic and Slovakia and a production of 120,000 pools per year are just some of the prerequisites that guarantee the European quality of the products offered.
Two production buildings for the production of swimming pools, water treatment products, solar panels, solar showers, counter-current swim systems. High-quality materials, unique technology and precise workmanship are a guarantee of European quality of the products produced.
Mountfield products in our shop
Delivery time
- The maximum delivery time for all products is up to 10 working days.
- Most products are in stock and can be received in a matter of days.
Price and free shipping
- The online store automatically calculates the price with the selected courier.
- Free delivery on orders over €150 to a Speedy office, for Bulgaria only.
- Below this threshold, delivery is at the customer’s expense according to the courier’s tariff.
- You can pick up the product in person from the warehouse or office store after prior arrangement.
Full terms and conditions: Delivery terms →
Frequently bought together
Anti-algae ALGAECIDE 5 l – algaecide for pools
Anti-algae ALGAECIDE 5 l is a liquid preparation for protecting pool water from algae growth. It is suitable for regular maintenance, initial treatment and shock treatment when needed.
- Also helps against greening and clouding of the water
- Limits the formation of slippery green areas on the walls and corners of the pool
